Component Silicone

SK-901 electronic grade alkoxy silicone sealant is a non-corrosive, low viscosity, one-component adhesive. It provides rapid skin formation when in contact with atmospheric moisture, and cures at

SK-376 is a one-component, short skinning time, neutral curing industrial alkoxy silicone sealant/adhesive. It will cure in the presence of atmospheric humidity.

SK-3628 is a white paste, one-component, RTV, high thermal conductivity (1.6 W/mK), non-corrosive neutral alkoxy curing silicone sealant adhesive.

SB-442 is a single component, white, thermally conductive silicone adhesive. At room temperature, It solidifies after absorbing moisture in the air.

SK-204 is a one-component, non-flowing (non-sag), versatile, alkoxy neutral curing RTV silicone sealant, specially formulated for bonding and sealing applications that require long-term reliability.

SFR-3100WT is a one-component, non-corrosive, UL-94v0 flame-retardant alkoxy silicone paste adhesive. It cures at room temperature with a 5-10 minutes fast tacky free time.

SR-612R is a 1 part, neutral curing, high temperature resistance (up to 250℃) silicone sealant adhesive. The rtv1 water resistant silicone adhesive exhibits good adhesion to most materials, such as

SFR-8100 is a one-component silicone sealant adhesive with fast tacky free time. This 1 part electronics silicone sealant can be cured when exposed to air moisture at room temperature to a form

SFR-8200 is a one component, ready-to-use, high performance RTV silicone rubber adhesive sealant. This RTV-1 electrically insulative silicone caulk will cure when exposed to atmospheric moisture to

SB-442 is RTV 1-part, silicone based high thermal conductive silicone sealant adhesive which contains a high ratio of thermally conductive fillers.

SR-130 is a one-component, non-flowing, neutral RTV cure silicone sealant. The one part silicone sealant can bond well with various substrates, such as transportation vehicles, boats, airplanes,

SC-722 is a two-component, transparent, addition (platinum) curing electric silicone gel. Its 1:1 mixing ratio makes it possible to be dispensed automatically or manually.